Scrapping a Freedom 30 - Lots of parts

Use this forum to buy, sell, trade or advertise anything. Non-commercial only.
totalkenobi
Posts: 2
Joined: Mon Mar 02, 2015 9:55 pm

Scrapping a Freedom 30 - Lots of parts

Post by totalkenobi »

I acquired a Freedom 30 who's sailing days are over. It died of neglect rather than being broken. It's now a lead mine that will be going in a dumpster once we thaw out. The rig and fittings are in excellent shape. It would be a shame to see that nice carbon fiber mast become the worlds most expensive flag pole.

Available:

Mast ~ $2000
Boom ~ $100
Jib Boom ~ $50
Pulpit ~ $200
Pushpit ~ $200

Other fittings such as portlights, hatches, rudder etc are available if anyone has a specific interest / needs a replacement. Prices are negotiable. The boat is located in Boston.

User avatar
mike cunningham
Posts: 489
Joined: Sat Dec 20, 2008 11:21 am
Location: Jacqueline, F30 #3, Discovery Bay, California

Re: Scrapping a Freedom 30 - Lots of parts

Post by mike cunningham »

Please check your PMs.

Also you did not mention gun mount, was it equipped?

Mike
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment

peaceandfreedom
Posts: 258
Joined: Wed Jul 29, 2009 8:51 pm
Location: F33 CK & F38 CK Milford ct

Re: Scrapping a Freedom 30 - Lots of parts

Post by peaceandfreedom »

You should be able to get a pretty penny for the lead keel.
I am interested in the deck hatches. Do you know what size they are and what condition they are in? The hatches I need to replace are around 17 inch square.
I is the engine available? Do you have a wheel autopilot?

happy sailing
Jim D

tnltracy
Posts: 117
Joined: Fri Oct 10, 2014 10:45 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by tnltracy »

Any chance she has the older Kenyon 1-1/4 traveler? If in good shape, I'd be interested in the track/cars/ ends. I'll be in Somerville later today, if possible, I'd try to stop by and take a look.
1984 Freedom 32 #28
Warwick Cove, Greenwich Bay, RI

TomBianca
Posts: 29
Joined: Tue Nov 08, 2011 8:58 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by TomBianca »

Any good sails available? Thanks, T.King

TomBianca
Posts: 29
Joined: Tue Nov 08, 2011 8:58 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by TomBianca »

Where is the boat located? Thanks, Tom King

TomBianca
Posts: 29
Joined: Tue Nov 08, 2011 8:58 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by TomBianca »

Greetings Freedom 30 Scrap Out Owner, how can we contact you, telephone number? We are in need of the port aft chock that integrates with slotted toe rail. And maybe the boom. Thanks, Tom King/434.973.0622

yarrow
Posts: 210
Joined: Fri May 14, 2010 6:38 pm
Location: providence RI

Re: Scrapping a Freedom 30 - Lots of parts

Post by yarrow »

where is the boat located, and what type of mast do you have?
82' F25 winged spar, inboard diesel
95' B3 I-14
providence RI

totalkenobi
Posts: 2
Joined: Mon Mar 02, 2015 9:55 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by totalkenobi »

Boston, MA

Mast is unstayed carbon fiber

rbrown739
Posts: 23
Joined: Thu Dec 04, 2008 11:06 pm

Re: Scrapping a Freedom 30 - Lots of parts

Post by rbrown739 »

I'm looking for an aluminum toe rail chock for docking lines for my Freedom 32 (Hoyt). Would you know that or do you have a picture? I could also send a picture of mine if that would be helpful, but I'm not exactly sure how to do that on this forum.

Post Reply