Looking for a F32 spinnaker

Use this forum to buy, sell, trade or advertise anything. Non-commercial only.

Looking for a F32 spinnaker

Postby JohnReinagel » Mon Sep 10, 2018 12:01 pm

Does anyone have an F32 (Garry Hoyt) spinnaker that they wish to sell?

I've now used the gun mount set up with great success but the old spin that came with it has blown up this past weekend. I was hoing to get the rest of the season out of it as using it adds a considerable amount of fun-factor to the boat and it is quite simple to use. I have been leaving most of the set up in place and to use it ony takes about 10 minutes to prep it, so I found myself using it more than expected, singlehanded every time even.
John


1984 Hoyt F32
Hull #53
User avatar
JohnReinagel
 
Posts: 41
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Postby peaceandfreedom » Mon Sep 10, 2018 2:32 pm

Hello John,
I have a spinnaker available. Please contact me via PM to discuss.

Happy sailing.

Jim D.
peaceandfreedom
 
Posts: 195
Joined: Wed Jul 29, 2009 8:51 pm
Location: F 33 CK Milford ct

Re: Looking for a F32 spinnaker

Postby JohnReinagel » Mon Sep 10, 2018 4:14 pm

Jim, two attempts at sending you a PM, both sit in my outbox. I'm uncertain as to why.
John


1984 Hoyt F32
Hull #53
User avatar
JohnReinagel
 
Posts: 41
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Postby sforgey2 » Mon Sep 10, 2018 8:38 pm

It would be great to have the dimensions of the spinnaker if anyone has them.

I am thinking of having one made as mine is on its last leg as well. One good puff and it is going to shred, but it sure is fun to ride.


Thanks,
Scott Forgey
Girlfriend
Freedom 32 Hoyt #85
sforgey2
 
Posts: 4
Joined: Mon Sep 10, 2018 7:02 am
Location: San Jose & Ft Lauderdale

Re: Looking for a F32 spinnaker

Postby GeoffSchultz » Tue Sep 11, 2018 3:35 am

JohnReinagel wrote:Jim, two attempts at sending you a PM, both sit in my outbox. I'm uncertain as to why.


Note that PMs sit in your outbox until the recipient reads them.
BlueJacket
1997 Freedom 40/40
http://www.GeoffSchultz.org
User avatar
GeoffSchultz
 
Posts: 1024
Joined: Thu Dec 04, 2008 8:39 am
Location: BlueJacket: Guatemala

Re: Looking for a F32 spinnaker

Postby JohnReinagel » Tue Sep 11, 2018 10:14 am

Ah thank you Geoff, obviously I wasn't aware of that, thanks for clarifying.
John


1984 Hoyt F32
Hull #53
User avatar
JohnReinagel
 
Posts: 41
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Postby mike cunningham » Tue Sep 11, 2018 11:11 am

Apparently the original F32 spinnakers are getting too long in the tooth. I blew mine out as well. I have a 32 rig on a my F30 and although it is fantastic set up, it is currently spinnaker-less. I am interested in a replacement also so if someone else happens to have one for sale please advise.
User avatar
mike cunningham
 
Posts: 296
Joined: Sat Dec 20, 2008 11:21 am
Location: Jacqueline, F30 #3, Discovery Bay, California


Return to Buy/Sell/Trade

Who is online

Users browsing this forum: No registered users and 3 guests