Freedom 40/40 Rigging List

Post Reply
User avatar
GeoffSchultz
Posts: 1135
Joined: Thu Dec 04, 2008 8:39 am
Location: BlueJacket: Guatemala
Contact:

Freedom 40/40 Rigging List

Post by GeoffSchultz »

This file contains the rigging specs for the 40/40.

-- Geoff
Attachments
4040_Rigging_List.pdf
(47.62 KiB) Downloaded 851 times
BlueJacket
1997 Freedom 40/40
http://www.GeoffSchultz.org

DaysailorJ
Posts: 25
Joined: Wed May 20, 2009 4:42 pm
Location: Stonington, CT

Re: Freedom 40/40 Rigging List

Post by DaysailorJ »

Geoff, this rigging list should come in handy. I see that it's the original list for your boat, as delivered, right? Can you tell me anthing about the configuration, at the time? What was the mast height, and were the halyards led to the cockpit? I just ordered a spare main halyard sized at 152' (Endura 7/16 braid), even though I just reduced the mast to 61.5" AWL, whereas your list only calls for 132'

User avatar
GeoffSchultz
Posts: 1135
Joined: Thu Dec 04, 2008 8:39 am
Location: BlueJacket: Guatemala
Contact:

Re: Freedom 40/40 Rigging List

Post by GeoffSchultz »

DaysailorJ wrote:Geoff, this rigging list should come in handy. I see that it's the original list for your boat, as delivered, right? Can you tell me anthing about the configuration, at the time? What was the mast height, and were the halyards led to the cockpit? I just ordered a spare main halyard sized at 152' (Endura 7/16 braid), even though I just reduced the mast to 61.5" AWL, whereas your list only calls for 132'
Yes, this is the original list that was loose in my manual. This is hull 25, circa 1997, with a 62' mast. All lines run to the cockpit. I'd add 10+' to the jib halyard as I tend to chafe through it and keep shortening it.

-- Geoff
BlueJacket
1997 Freedom 40/40
http://www.GeoffSchultz.org

rphdiego
Posts: 6
Joined: Fri Nov 23, 2018 9:48 am

Re: Freedom 40/40 Rigging List

Post by rphdiego »

Thank you Geoff!

Post Reply