Masthead LED for Freedom 25 non-winged

Masthead LED for Freedom 25 non-winged

Postby LazyJack » Mon May 09, 2016 10:50 am

I want to switch out my masthead light for an LED and would like to send someone up the mast only once if possible. Does anyone have the original specs so I can buy the appropriate bulb, adaptor and or whole unit.

Thanks,
Scott
Feel free to text 240-515-7805
LazyJack
 
Posts: 2
Joined: Fri Oct 23, 2015 6:24 am

Re: Masthead LED for Freedom 25 non-winged

Postby unfetteredalexandria » Sun May 15, 2016 6:07 pm

If your setup is same as mine, I have one of the Perko combination masthead and anchor lights (see attachment). I was able to replace the bulbs with 2x Dr. LED "Festoon Star." However, it was not installed with the DPDT switch called out in the attachment, so in fact I had no anchor light capability. When I last had the mast out, I reran a 3-conductor bundle and used a diode between 2 "ordinary" switch-breakers in the panel, as the other attachment shows. (I had also replaced the J24 fuse panel with a Blue Seas breaker panel, but you need not do this). The 8A breakers are way oversized for this, but they are there to protect the wire, not the bulbs.
Attachments
AnchorSteamingDioge.png
Anchor+Steaming light with diode.
AnchorSteamingDioge.png (88.63 KiB) Viewed 1987 times
PerkoMastheadLight.pdf
Masthead light for round-mast F25
(167.11 KiB) Downloaded 137 times
1984 round-mast Freedom 25
Western Shore of the Chesapeake
unfetteredalexandria
 
Posts: 93
Joined: Sun Feb 22, 2009 1:57 pm

Re: Masthead LED for Freedom 25 non-winged

Postby LazyJack » Tue Jun 14, 2016 12:30 pm

Thanks so much for the help.
LazyJack
 
Posts: 2
Joined: Fri Oct 23, 2015 6:24 am


Return to Manuals and Documentation

Who is online

Users browsing this forum: No registered users and 1 guest