Has anyone found a product and a way to replace the gaskets on the opening portlights?
Thanks,
Tricia
F30 Bomar aluminum portlight gaskets
- mike cunningham
- Posts: 489
- Joined: Sat Dec 20, 2008 11:21 am
- Location: Jacqueline, F30 #3, Discovery Bay, California
Re: F30 Bomar aluminum portlight gaskets
The gasket is available through pampanette. Google them then go to Bowmar. You may have to call them to order. When you replace the gasket be really careful with your measuring. I've replaced a few times and always cut a little short which causes me to have to cut a small filler piece. Kinda dumb, I know, but the material compresses when you put it on so probably best to install it before you cut then do the trimming as the very last step.
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Re: F30 Bomar aluminum portlight gaskets
Thanks, Mike.
Tricia
Tricia