F38 Mast Leak, Ready to admit defeat

Anything that doesn't fit into the other Physical Systems categories

Re: F38 Mast Leak, Ready to admit defeat

Postby GeoffSchultz » Tue Jun 05, 2018 6:08 pm

I use the halyard to pull the mast ring up when I used adhesive. You have to work your way around it with a putty knife cutting away what you and and pulling from different angles. When it releases, it does so with a bang and may scratch the paint, so placing a cloth around the top edge may be a good idea.

Also, it appears that I misspoke when I said that I didn't worry about water coming down the bolts as I was just forward looking at ours and saw that there was silicon under the washers.

-- Geoff
BlueJacket
1997 Freedom 40/40
http://www.GeoffSchultz.org
User avatar
GeoffSchultz
 
Posts: 1024
Joined: Thu Dec 04, 2008 8:39 am
Location: BlueJacket: Guatemala

Re: F38 Mast Leak, Ready to admit defeat

Postby mike cunningham » Wed Jun 06, 2018 11:55 am

I had not pulled the ring and mast for many many years. I also found using halyards helped to get the ring up. One caution, try to apply balanced upward pull on the ring so one side doesn't give causing a ring pitch into the mast.
User avatar
mike cunningham
 
Posts: 297
Joined: Sat Dec 20, 2008 11:21 am
Location: Jacqueline, F30 #3, Discovery Bay, California

Re: F38 Mast Leak, Ready to admit defeat

Postby Ereiss » Wed Jun 06, 2018 3:33 pm

Is it a casting that is brittle? It looked the stsinless bolts may have corroded a bit making it more difficult.
Ed Reiss
Being There
F38 - #154
out of Marion, MA
User avatar
Ereiss
 
Posts: 339
Joined: Sat Dec 06, 2008 12:32 pm

Previous

Return to Everything Else

Who is online

Users browsing this forum: mike cunningham and 1 guest