F30 CK prop shaft

Engines, Drive trains, Propellers, Steering, Ground Tackle and other mechanical system
Post Reply
andygc
Posts: 92
Joined: Sun Jul 31, 2016 4:33 pm

F30 CK prop shaft

Post by andygc »

I'm in the process of buying a 1990 F30 CK, subject to survey. The boat has a feathering prop and hasn't been out of the water for over 3 years, so little chance of any anode remaining and a high chance of some bad corrosion. Among my options if there is a problem is having a suitable prop in my car to fit while the Featherstream goes back to the manufacturers for inspection and repair or replacement. Does anybody happen to know the specification of the prop shaft in these UK-built boats? That is, diameter, taper and shaft nut thread.

Any help appreciated.
Sold for health reasons :(

andygc
Posts: 92
Joined: Sun Jul 31, 2016 4:33 pm

Re: F30 CK prop shaft

Post by andygc »

I have found out that it's 1 inch diameter and 1 in 12 taper, but because of other problems the nut size doesn't matter at the moment.
Sold for health reasons :(

Post Reply