Mull F30 Hull #3 Mast Dimensions

Mull F30 Hull #3 Mast Dimensions

Postby mike cunningham » Fri Dec 09, 2016 4:58 pm

For posterity, Here are are various dimensions based on my measurements with mast out of boat.

Top of crane plate to deck at partners 42 feet 8 inches

Top of crane to top of Jib/spinnaker halyard plate (not box, the support plate surrounding box) 13 feet 9 inches

jib/spinnaker Halyard plate dimensions 10 inches top to bottom (did not measure side to side...oops)

jib/spinnaker halyard BOX dimensions 6 inches high by 1.5 inches wide centered in plate

distance form bottom of halyard plate to top of mast gooseneck bulge 23 feet 6 inches

Mast circumference measured at TOP of HALYARD plate 22 inches

Mast outside diameter at base of mast 9 inches

mast wall thickness at base of mast 1/2 inch

mast ring 2 and 1/2 inches high

spartight wedge 3 inches high

The rest can be measured with mast in boat.
User avatar
mike cunningham
 
Posts: 297
Joined: Sat Dec 20, 2008 11:21 am
Location: Jacqueline, F30 #3, Discovery Bay, California

Return to Rigging and Sails

Who is online

Users browsing this forum: No registered users and 1 guest