For posterity, Here are are various dimensions based on my measurements with mast out of boat.
Top of crane plate to deck at partners 42 feet 8 inches
Top of crane to top of Jib/spinnaker halyard plate (not box, the support plate surrounding box) 13 feet 9 inches
jib/spinnaker Halyard plate dimensions 10 inches top to bottom (did not measure side to side...oops)
jib/spinnaker halyard BOX dimensions 6 inches high by 1.5 inches wide centered in plate
distance form bottom of halyard plate to top of mast gooseneck bulge 23 feet 6 inches
Mast circumference measured at TOP of HALYARD plate 22 inches
Mast outside diameter at base of mast 9 inches
mast wall thickness at base of mast 1/2 inch
mast ring 2 and 1/2 inches high
spartight wedge 3 inches high
The rest can be measured with mast in boat.
Mull F30 Hull #3 Mast Dimensions
- mike cunningham
- Posts: 489
- Joined: Sat Dec 20, 2008 11:21 am
- Location: Jacqueline, F30 #3, Discovery Bay, California
Mull F30 Hull #3 Mast Dimensions
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment