F21 spinnaker pole diameter

F21 spinnaker pole diameter

Postby Jesse » Sat Jul 07, 2018 6:51 am

Hi all,

I have seen a few posts about the gun mount rig, but I am still looking for the diameter of the pole on the F21. I have the gun mount but need to make the pole. I measured the inner diameter of the gun mount sleeve at 3.25 inches. I can get aluminum tube stock in 3.25 and 3.00 inch outer diameter. I assume I will need to use 3.00 OD to allow clearance for the pole to slide through the sleeve, but I also don't want a lot of play and I know there is some measurement error in my measurement. Can anyone tell me the outer diameter of their spinnaker pole on the F21? Thanks in advance.

Best wishes
Posts: 10
Joined: Sun Sep 11, 2016 3:56 pm
Location: Buzzards Bay, MA & Montreal, QC

Re: F21 spinnaker pole diameter

Postby hkowalczyk » Tue Jul 10, 2018 12:13 pm

The OD of the pole is 3 inches. Remember there is a liner in the gunmount that will take up some of that space.
Posts: 15
Joined: Sat Sep 04, 2010 1:55 am

Return to Rigging and Sails

Who is online

Users browsing this forum: No registered users and 2 guests