Your personal email address did not go thru. Try again.
Steve
Search found 94 matches
- Thu Mar 07, 2024 5:45 pm
- Forum: Buy/Sell/Trade
- Topic: Looking for Freedom 25
- Replies: 3
- Views: 950
- Fri Nov 10, 2023 2:38 pm
- Forum: Engines and Mechanical Systems
- Topic: Fuel tank “gunk”
- Replies: 6
- Views: 793
Re: Fuel tank “gunk”
Go under the bunk in the aft cabin and open the fuel tank. A rag was found in my tank. Also have the fuel polished. I got someone out of Scituate who was reasonable to come to the North Shore. Haven't had a problem since.
- Thu Nov 09, 2023 8:48 pm
- Forum: Engines and Mechanical Systems
- Topic: Pendrick 35 Maxprop pitch settings
- Replies: 4
- Views: 675
Re: Pendrick 35 Maxprop pitch settings
Here are my setting data -
GEAR RATIO 2.42-1
PROP DIAMETER 17"
PROP ANODES 63 mm
suggested settings 16˚
letter codes C K
Make sure you have the same gear ratio. If not, contact PYI. They will be happy to help.
Stephen
GEAR RATIO 2.42-1
PROP DIAMETER 17"
PROP ANODES 63 mm
suggested settings 16˚
letter codes C K
Make sure you have the same gear ratio. If not, contact PYI. They will be happy to help.
Stephen
- Sun Oct 08, 2023 2:01 am
- Forum: Buy/Sell/Trade
- Topic: Looking for Freedom 25
- Replies: 3
- Views: 950
Looking for Freedom 25
Looking for Freedom 25 in New England area. I've had 3 Freedoms in the past. Going back to day sailing.
- Thu Apr 27, 2023 11:24 am
- Forum: Plumbing
- Topic: Marelon Valve Replacement
- Replies: 11
- Views: 10440
Re: Marelon Valve Replacement
Hi,
Contact Forespar regarding your leak. They sent me replacement seals and handles. This was some years ago but worth an email.
Also, watch your thru-hull fittings just above the water line. The sun degrades them and they need to be replaced.
Contact Forespar regarding your leak. They sent me replacement seals and handles. This was some years ago but worth an email.
Also, watch your thru-hull fittings just above the water line. The sun degrades them and they need to be replaced.
- Fri Feb 24, 2023 9:38 am
- Forum: Everything Else
- Topic: Wood panel help
- Replies: 3
- Views: 2138
Re: Wood panel help
Cockpit table. Two hinges for the Binnacle. One for a leg. Enjoy.
- Thu Feb 02, 2023 10:10 pm
- Forum: Engines and Mechanical Systems
- Topic: Freedom engine shut off length
- Replies: 6
- Views: 3499
Re: Freedom engine shut off length
Yanman part # 7000mm (7 meters), part number 129470-67560 23'. Any good Yanmar part store should have or be able to get it.
Throw this on to your browser search bar and you will get dealers: 7000mm (7 meters), part number 129470-67560
Good luck getting out of the lazarette!
Steve
Throw this on to your browser search bar and you will get dealers: 7000mm (7 meters), part number 129470-67560
Good luck getting out of the lazarette!
Steve
- Thu Jul 14, 2022 3:52 pm
- Forum: Random Chatter
- Topic: -
- Replies: 4
- Views: 3023
Re: New owners of F35 Pedrick!
Hi and welcome, We have hull #70 in the Pedrick 35 lineage. We will be sailing from Marblehead to Rockland next week. We are currently discussing doing day hops along the coast. Where is your mooring? We might be able to have an evening cocktail visit and trade upgrades and stories. The picture was ...
- Wed Jul 06, 2022 4:07 pm
- Forum: Engines and Mechanical Systems
- Topic: Pedrick F35 rudder bearings....
- Replies: 6
- Views: 5345
Re: Pedrick F35 rudder bearings....
And I have no idea of the dimensions. Sorry. Tides Marine should have the dimensions of the bearing.
Best of luck.
Stephen
Best of luck.
Stephen
- Wed Jul 06, 2022 11:12 am
- Forum: Engines and Mechanical Systems
- Topic: Pedrick F35 rudder bearings....
- Replies: 6
- Views: 5345
Re: Pedrick F35 rudder bearings....
Steve, I've learned since then that this was the wrong approach. There should be two rudder bearings installed on the rudder post. This should prevent the rudder from hitting. This should eliminate the need for the collar that I now live with. I was misguided by the head mechanic at a major boat yar...