Posted by douglas.domurat (douglas.domurat@…>)
Hi Folks,
I’m near the point of getting Ab Initio all buttoned up and soon she’ll be
transported to the
port for the cargo ship sail to Thailand. Ab Initio is fitted out nicely and I
don’t envision
adding too much. That being said I enjoyed playing with the Hoyt gunmount
spinnaker on my
'86 F36. Ab Initio is fitted with the reinforced bow pulpit but not the
spinnaker package.
Does anyone know where I can get the sleeve that fits to the bow pulpit? The
rest of the gear
I think I can obtain from here. The yard, blocks, lines and spinnaker are a bit
easier to
procure.
Thanks,
Doug
Posted by Herman and Gail Schiller (hschiller2@…>)
Two comments:
The yard on my Mull 28 has a cylindrical center area, and
two tapered ends with sheaves within the ends, ala’ masthead sheaves
on smaller boats.
I’d look for a source of Teflon tubing/pipe on the Internet,
and have either its interior or exterior surface machined to fit the
pulpit fixture and yard.
Herm
At 10:35 AM 1/27/2008, you wrote:
Hi Folks,
I’m near the point of getting Ab Initio all buttoned up and soon
she’ll be transported to the
port for the cargo ship sail to Thailand. Ab Initio is fitted out
nicely and I don’t envision
adding too much. That being said I enjoyed playing with the Hoyt
gunmount spinnaker on my
'86 F36. Ab Initio is fitted with the reinforced bow pulpit but not
the spinnaker package.
Does anyone know where I can get the sleeve that fits to the bow
pulpit? The rest of the gear
I think I can obtain from here. The yard, blocks, lines and
spinnaker are a bit easier to
procure.
Thanks,
Doug
Posted by Mike Bergeron (mbergero@…>)
I have the gun mount pole, sleeve and spinnaker from my "84 F32 that I can no longer use as the prior owner redesigned the bow pulpit.
Speaking of parts no longer usable on my boat: I also have two horizontal 6# (5#?) LP tanks collecting dust in my shop.
Any interest?
Mike
F32 Cat Nap
Maine
----- Original Message -----
From: douglas.domurat
To: FreedomOwnersGroup@yahoogroups.com
Sent: Sunday, January 27, 2008 10:35 AM
Subject: [FreedomOwnersGroup] Hoyt gunmount spinnaker for F 30 Mull
Hi Folks,I’m near the point of getting Ab Initio all buttoned up and soon she’ll be transported to the port for the cargo ship sail to Thailand. Ab Initio is fitted out nicely and I don’t envision adding too much. That being said I enjoyed playing with the Hoyt gunmount spinnaker on my '86 F36. Ab Initio is fitted with the reinforced bow pulpit but not the spinnaker package. Does anyone know where I can get the sleeve that fits to the bow pulpit? The rest of the gear I think I can obtain from here. The yard, blocks, lines and spinnaker are a bit easier to procure.Thanks,Doug
Posted by Thomas Wales (twales@…>)
Hi Mike,
I’ll be glad to buy one of the LP tanks from you. Please
contact me offline and I’ll make arrangements to pick one up. Thanks
TW, also in Maine.
F32 Anoush Koon, Pemaquid
At 03:26 PM 1/27/2008, you wrote:
I have the gun mount pole, sleeve and spinnaker from my "84 F32 that
I can no longer use as the prior owner redesigned the bow pulpit.
Speaking of parts no longer usable on my boat: I also have two
horizontal 6# (5#?) LP tanks collecting dust in my shop.
Any interest?
Mike
F32 Cat Nap
Maine
----- Original Message -----
From: mailto:douglas.domurat@...douglas.domurat
To:
<mailto:FreedomOwnersGroup@yahoogroups.com>FreedomOwnersGroup@yahoogroups.com
Sent: Sunday, January 27, 2008 10:35 AM
Subject: [FreedomOwnersGroup] Hoyt gunmount spinnaker for F 30 Mull
Hi Folks,
I’m near the point of getting Ab Initio all buttoned up and soon
she’ll be transported to the
port for the cargo ship sail to Thailand. Ab Initio is fitted out
nicely and I don’t envision
adding too much. That being said I enjoyed playing with the Hoyt
gunmount spinnaker on my
'86 F36. Ab Initio is fitted with the reinforced bow pulpit but not
the spinnaker package.
Does anyone know where I can get the sleeve that fits to the bow
pulpit? The rest of the gear
I think I can obtain from here. The yard, blocks, lines and
spinnaker are a bit easier to
procure.
Thanks,
Doug
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.14/1247 - Release Date:
1/28/2008 10:59 AM
–
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.14/1247 - Release Date: 1/28/2008
10:59 AM
Posted by douglas.domurat (douglas.domurat@…>)
Hi Mike,
Sounds interesting. Not sure if the overall dimensions are the same but I’d
expect they’re
very similar. I’ll contact you offline and maybe we could see if it might work.
Thanks,
Doug
— In FreedomOwnersGroup@yahoogroups.com, “Mike Bergeron” <mbergero@…> wrote:
I have the gun mount pole, sleeve and spinnaker from my "84 F32 that I can no
longer
use as the prior owner redesigned the bow pulpit.
Speaking of parts no longer usable on my boat: I also have two horizontal 6#
(5#?) LP
tanks collecting dust in my shop.
Any interest?
Mike
F32 Cat Nap
Maine
Posted by rick_simonds (rick_simonds@…>)
— In FreedomOwnersGroup@yahoogroups.com, Thomas Wales <twales@…>
wrote:
I’m interested in the other one. I’m not sure if there’s a problem
shipping these things, though…
rick_simonds at yahoo dot com
\
Hi Mike,
I’ll be glad to buy one of the LP tanks from you. Please
contact me offline and I’ll make arrangements to pick one up.
Thanks
TW, also in Maine.
F32 Anoush Koon, Pemaquid
At 03:26 PM 1/27/2008, you wrote:
I have the gun mount pole, sleeve and spinnaker from my "84 F32
that
I can no longer use as the prior owner redesigned the bow pulpit.
Speaking of parts no longer usable on my boat: I also have two
horizontal 6# (5#?) LP tanks collecting dust in my shop.
Any interest?
Mike
F32 Cat Nap
Maine
Posted by Mike Bergeron (mbergero@…>)
Hi Rick,
I am not sure about shipping, either. I’m sure it falls under hazmat rules. Where are you located?
Mike
----- Original Message -----
From: rick_simonds
To: FreedomOwnersGroup@yahoogroups.com
Sent: Monday, January 28, 2008 11:08 AM
Subject: [FreedomOwnersGroup] Re: Hoyt gunmount spinnaker for F 30 Mull
— In FreedomOwnersGroup@yahoogroups.com, Thomas Wales <twales@…> wrote:I’m interested in the other one. I’m not sure if there’s a problem shipping these things, though…rick_simonds at yahoo dot com>> Hi Mike,> I’ll be glad to buy one of the LP tanks from you. Please > contact me offline and I’ll make arrangements to pick one up. Thanks> TW, also in Maine.> F32 Anoush Koon, Pemaquid> > > > At 03:26 PM 1/27/2008, you wrote:> > >I have the gun mount pole, sleeve and spinnaker from my "84 F32 that > >I can no longer use as the prior owner redesigned the bow pulpit.> >> >Speaking of parts no longer usable on my boat: I also have two > >horizontal 6# (5#?) LP tanks collecting dust in my shop.> >> >Any interest?> >> >Mike> >> >F32 Cat Nap> >Maine> >
Posted by ron barr (rwhb@…>)
Newport RI and where are you?
Ron
Newport RI 02840
From: FreedomOwnersGroup@yahoogroups.com
[mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Mike Bergeron
Sent: Saturday, February 02, 2008 10:53 AM
To: FreedomOwnersGroup@yahoogroups.com
Subject: Re: [FreedomOwnersGroup] Re: Hoyt gunmount spinnaker for F 30
Mull
\
Hi
Rick,
\
I
am not sure about shipping, either. I’m sure it falls under hazmat
rules. Where are you located?
\
Mike
\
\
Original Message -----
From: rick_simonds
To: FreedomOwnersGroup@yahoogroups.com
Sent: Monday, January 28,
2008 11:08 AM
Subject: [FreedomOwnersGroup]
Re: Hoyt gunmount spinnaker for F 30 Mull
\
— In FreedomOwnersGroup@yahoogroups.com,
Thomas Wales <twales@…>
wrote:
I’m interested in the other one. I’m not sure if there’s a problem
shipping these things, though…
rick_simonds at yahoo dot com
Hi Mike,
I’ll be glad to buy one of the LP tanks from you. Please
contact me offline and I’ll make arrangements to pick one up.
Thanks
TW, also in Maine.
F32 Anoush Koon, Pemaquid
At 03:26 PM 1/27/2008, you wrote:
I have the gun mount pole, sleeve and spinnaker from my "84 F32
that
I can no longer use as the prior owner redesigned the bow pulpit.
Speaking of parts no longer usable on my boat: I also have two
horizontal 6# (5#?) LP tanks collecting dust in my shop.
Any interest?
Mike
F32 Cat Nap
Maine
\