Posted by Sward (swardfullsail@…>)
Bob Weeks <rweeks6508@…> wrote: If you can send it would appreciate it. bob From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of SwardSent: Thursday, October 18, 2007 8:54 PMTo: FreedomOwnersGroup@yahoogroups.comSubject: RE: [FreedomOwnersGroup] Two Questions A couple of years ago, this site or the old site, had a design of the logo for those who wanted it. Does it still exist. I have it in my documents. I could forward it to you if you want it. SwardBob Weeks <rweeks6508@verizon.net>
wrote: Thanks everyone for the helpful hints and input on my two questions! Bob From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Andrew KinseySent: Thursday, October 18, 2007 11:56 AMTo: FreedomOwnersGroup@yahoogroups.comSubject: Re: [FreedomOwnersGroup] Two Questions Bob, The link below will give you some good advice regarding cutlass bearing renewal. http://www.diybob.com/diyCutlessBearing.htm It’s important to check the condition of the shaft while it is pulled. Look for wear, or evidence of crevice corrosion in way of the cutlass bearing and stuffing box wear locations. If you find wear down have the shaft inspected for possible renewal. Regards, Andrew Kinsey Bob <rweeks6508@verizon.net> wrote: 1. Has anyone replaced their cutlass bearing, any secrets such as set screws, etc2. Freedon logo on mail sail. Does anyone know where I can get them?Bob Andrew KinseyCoastal Marine SurveysP.O Box
430Mattituck, NY 11952NAMS Certified Marine SurveyorSAMS Accredited Marine Surveyor #848ABYC Standards AccreditedUSCG Licensed Master, Unlimited Tonnage, Upon OceansPhone 631-298-9518Fax 631-298-5282Cell 631-807-8907This communication, together with any attachments hereto or links contained herein, is for the sole use of the intended recipient(s) and may contain information that is confidential or legally protected. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, dissemination, distribution or use of this communication is STRICTLY PROHIBITED. If you have received this communication in error, please notify the sender immediately by return e-mail message and delete the original and all copies of the communication, along with any
attachments hereto or links herein, from your system. __________________________________________________Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com “Life is a Reach, then you Jibe” SWARD “Life is a Reach, then you Jibe” SWARD
Attachment: (image/pjpeg) Freedom Logo-Jib specs 005.jpg [not stored]
Attachment: (image/tiff) Freedom Logo-Jib specs 006.tif [not stored]
Posted by Sward (swardfullsail@…>)
I just sent the logo as an attachment so is at the bottom of the last email for anyone interestedSward <swardfullsail@…> wrote: Bob Weeks <rweeks6508@verizon.net> wrote: If you can send it would appreciate it. bob From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of SwardSent: Thursday, October 18, 2007 8:54 PMTo: FreedomOwnersGroup@yahoogroups.comSubject: RE: [FreedomOwnersGroup] Two Questions A couple of years ago, this site or the old site, had a design of the logo for those who wanted it. Does it still exist. I have it in my documents. I could forward it to you if you want it. SwardBob Weeks <rweeks6508@verizon.net> wrote: Thanks everyone for the helpful hints and input on my two questions! Bob From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Andrew KinseySent: Thursday, October 18, 2007 11:56 AMTo: FreedomOwnersGroup@yahoogroups.comSubject: Re: [FreedomOwnersGroup] Two Questions Bob, The link below will give you some good advice regarding cutlass bearing renewal. http://www.diybob.com/diyCutlessBearing.htm It’s important to check the condition of the shaft while it is pulled. Look for wear, or evidence of crevice corrosion in way of the cutlass bearing and stuffing box wear locations. If
you find wear down have the shaft inspected for possible renewal. Regards, Andrew Kinsey Bob <rweeks6508@verizon.net> wrote: 1. Has anyone replaced their cutlass bearing, any secrets such as set screws, etc2. Freedon logo on mail sail. Does anyone know where I can get them?Bob Andrew KinseyCoastal Marine SurveysP.O Box 430Mattituck, NY 11952NAMS Certified Marine SurveyorSAMS Accredited Marine Surveyor #848ABYC Standards AccreditedUSCG Licensed Master, Unlimited Tonnage, Upon OceansPhone 631-298-9518Fax 631-298-5282Cell 631-807-8907This communication, together with any attachments hereto or links contained herein, is for the sole use of the intended recipient(s) and may contain information that is confidential or legally protected. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, dissemination, distribution or use of this communication is
STRICTLY PROHIBITED. If you have received this communication in error, please notify the sender immediately by return e-mail message and delete the original and all copies of the communication, along with any attachments hereto or links herein, from your system. __________________________________________________Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com “Life
is a Reach, then you Jibe” SWARD “Life is a Reach, then you Jibe” SWARD “Life is a Reach, then you Jibe” SWARD
Posted by Al Lorman (ajl@…>)
This
logo seems to have lost its bottom in posting. I’ve posted another
one in the Files section, named Freedom Logo.pdf.
Al
Lorman
F30
Ab Initio
From: FreedomOwnersGroup@yahoogroups.com
[mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Sward
Sent: Friday, October 19, 2007 7:05 PM
To: FreedomOwnersGroup@yahoogroups.com
Subject: RE: [FreedomOwnersGroup] Freedom Logo
\
I just sent the logo as an attachment so is at the bottom of the last email
for anyone interested
Sward <swardfullsail@…> wrote:
Bob Weeks <rweeks6508@…> wrote:
If you can send it would appreciate it.
bob
From: FreedomOwnersGroup@yahoogroups.com
[mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Sward
Sent: Thursday, October 18, 2007 8:54 PM
To: FreedomOwnersGroup@yahoogroups.com
Subject: RE: [FreedomOwnersGroup] Two Questions
A couple of years ago, this site or the old site, had a
design of the logo for those who wanted it. Does it still exist. I
have it in my documents. I could forward it to you if you want it.
Sward
Bob Weeks <rweeks6508@…> wrote:
Thanks everyone for the helpful hints and input on my two questions!
Bob
From: FreedomOwnersGroup@yahoogroups.com
[mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of Andrew Kinsey
Sent: Thursday, October 18, 2007 11:56 AM
To: FreedomOwnersGroup@yahoogroups.com
Subject: Re: [FreedomOwnersGroup] Two Questions
Bob,
The link below will give you some good advice regarding
cutlass bearing renewal.
http://www.diybob.com/diyCutlessBearing.htm
It’s important to check the condition of the shaft while it
is pulled. Look for wear, or evidence of crevice corrosion in way of the
cutlass bearing and stuffing box wear locations. If you find wear
down have the shaft inspected for possible renewal.
Regards,
Andrew Kinsey
Bob <rweeks6508@…> wrote:
\
- Has anyone replaced their cutlass bearing, any secrets
such as set screws, etc - Freedon logo on mail sail. Does anyone know where I can get them?
Bob
Andrew Kinsey
Coastal Marine Surveys
P.O Box 430
Mattituck, NY 11952
NAMS Certified Marine Surveyor
SAMS Accredited Marine Surveyor #848
ABYC Standards Accredited
USCG Licensed Master, Unlimited Tonnage, Upon Oceans
Phone 631-298-9518
Fax 631-298-5282
Cell 631-807-8907
This communication, together with any attachments hereto or links
contained herein, is for the sole use of the intended recipient(s) and may
contain information that is confidential or legally protected. If you are not
the intended recipient, you are hereby notified that any review, disclosure,
copying, dissemination, distribution or use of this communication is STRICTLY
PROHIBITED. If you have received this communication in error, please notify the
sender immediately by return e-mail message and delete the original and all
copies of the communication, along with any attachments hereto or links herein,
from your system.
\
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
“Life is a Reach, then you
Jibe”
SWARD
“Life is a Reach, then you
Jibe”
\
SWARD
“Life is a Reach, then you
Jibe”
\
SWARD
\