# Throttle cable

**URL:** <https://freedomyachts.org/t/throttle-cable/12640>\
**Category:** General Discussion\
**Tags:** f4040\
**Created:** [September 14, 2026, 4:17pm UTC](https://freedomyachts.org/t/throttle-cable/12640 "2026-09-14T16:17:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarcJ](https://freedomyachts.org/letter_avatar_proxy/v4/letter/m/7ba0ec/32.png) [@MarcJ](https://freedomyachts.org/u/MarcJ)\
**Post date:** [September 14, 2026, 4:17pm UTC](https://freedomyachts.org/t/throttle-cable/12640/1 "2026-09-14T16:17:59Z")

</div>

It was recommended that I replace the throttle cable and remote on Mr Freedom 40/40 with Yanmar 3JH2-TE. I cannot read the notation, if any, on the current cable. Anyone know what the cable type and length is?

---

<div class="post-metadata">

**Author:** ![Earthman](https://freedomyachts.org/user_avatar/freedomyachts.org/earthman/32/143_2.png) [@Earthman](https://freedomyachts.org/u/Earthman)\
**Post date:** [September 15, 2026, 11:09am UTC](https://freedomyachts.org/t/throttle-cable/12640/2 "2026-09-15T11:09:00Z")

</div>

Hi, Just curious, why the recommendation to replace the cable? Is it recommended at a certain frequency? The repeating throttle issue on my Freedom is that the rotating throttle part attached on the motor (that the cable connects to) needs repeating lube and movement back and forth to loosen it.

---

<div class="post-metadata">

**Author:** ![MarcJ](https://freedomyachts.org/letter_avatar_proxy/v4/letter/m/7ba0ec/32.png) [@MarcJ](https://freedomyachts.org/u/MarcJ)\
**Post date:** [September 15, 2026, 12:12pm UTC](https://freedomyachts.org/t/throttle-cable/12640/3 "2026-09-15T12:12:37Z")

</div>

Check your cable for wear. Mine has some weak spots. It may last forever or fail tomorrow Mine are probably original, over 30 years old. I’m planning to go offshore and it was recommended to replace. Good seamanship and another expense.  
I called Edson and they were able to identify the replacement. I just need to measure the length.

---

<div class="post-metadata">

**Author:** ![Earthman](https://freedomyachts.org/user_avatar/freedomyachts.org/earthman/32/143_2.png) [@Earthman](https://freedomyachts.org/u/Earthman)\
**Post date:** [September 15, 2026, 1:57pm UTC](https://freedomyachts.org/t/throttle-cable/12640/4 "2026-09-15T13:57:02Z")

</div>

Excellent input, thanks!

Have a great trip!

---

<div class="post-metadata">

**Author:** ![Eben](https://freedomyachts.org/user_avatar/freedomyachts.org/eben/32/3362_2.png) [@Eben](https://freedomyachts.org/u/Eben)\
**Post date:** [September 15, 2026, 4:26pm UTC](https://freedomyachts.org/t/throttle-cable/12640/5 "2026-09-15T16:26:24Z")

</div>

Marc, please confirm when you get the cable if indeed 20’ is the right length. Im sure other 40/40 owners would be quite thankful to know the length and diameter of it.

---

<div class="post-metadata">

**Author:** ![MarcJ](https://freedomyachts.org/letter_avatar_proxy/v4/letter/m/7ba0ec/32.png) [@MarcJ](https://freedomyachts.org/u/MarcJ)\
**Post date:** [September 15, 2026, 5:55pm UTC](https://freedomyachts.org/t/throttle-cable/12640/6 "2026-09-15T17:55:00Z")

</div>

It’s actually an easy run. I ran some paracord from throttle remote to engine and measured 22‘ but that’s tight and some slack is needed. I may get 24’ and still worry.

Marc
