Anyone have a used 3GM30 Manual for sale?
I ended up repowering with a rebuilt one and dont have the manual. Runs great, will detail the expensive issues I ran into...but need a manual for now.
Thanks
3GM30 Manual -
3GM30 Manual -
Scott Forgey
Girlfriend
Freedom 32 Hoyt #81
Girlfriend
Freedom 32 Hoyt #81
Re: 3GM30 Manual -
Try looking online. I found mine there for $0.0
Re: 3GM30 Manual -
Will do.
I saw a pdf one but who has a printer these days?!
Will look, thanks.
I saw a pdf one but who has a printer these days?!
Will look, thanks.
Scott Forgey
Girlfriend
Freedom 32 Hoyt #81
Girlfriend
Freedom 32 Hoyt #81
- mike cunningham
- Posts: 489
- Joined: Sat Dec 20, 2008 11:21 am
- Location: Jacqueline, F30 #3, Discovery Bay, California
Re: 3GM30 Manual -
My 2gm20 manual is on the boat but I think it covers 3gm20 as well. I can confirm that.
If so I could take it to Kinkos and copy it for you. Not sure how much that would cost these days but I would do it if you ran out of other options. I think the whole service manual is about 200 double sided pages plus a number of fold outs. I would also get a parts book, those are engine specific but absolutely invaluable because of the detailed breakdown drawings of each subsystem.
Over the years I have saved a kings ransom doing my own work on the engine and having these books was key.
If so I could take it to Kinkos and copy it for you. Not sure how much that would cost these days but I would do it if you ran out of other options. I think the whole service manual is about 200 double sided pages plus a number of fold outs. I would also get a parts book, those are engine specific but absolutely invaluable because of the detailed breakdown drawings of each subsystem.
Over the years I have saved a kings ransom doing my own work on the engine and having these books was key.
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Re: 3GM30 Manual -
Thanks so much.
I used mine for the old 3gmf all the time.
I can buy the PDF of the book and have it printed, so no worries. $26 on Etsy.
Cheers
I used mine for the old 3gmf all the time.
I can buy the PDF of the book and have it printed, so no worries. $26 on Etsy.
Cheers
Scott Forgey
Girlfriend
Freedom 32 Hoyt #81
Girlfriend
Freedom 32 Hoyt #81
Re: 3GM30 Manual -
Hi,
You should able to get both the manual and parts catalog here on J109.org
https://j109.org/docs/Yanmar_3GM30F3.pdf
https://j109.org/docs/Yanmar-3GM30-parts-catalog.pdf
You should able to get both the manual and parts catalog here on J109.org
https://j109.org/docs/Yanmar_3GM30F3.pdf
https://j109.org/docs/Yanmar-3GM30-parts-catalog.pdf
Pat
Schoodic - F36
Beverly MA
Schoodic - F36
Beverly MA
- mike cunningham
- Posts: 489
- Joined: Sat Dec 20, 2008 11:21 am
- Location: Jacqueline, F30 #3, Discovery Bay, California
Re: 3GM30 Manual -
Pearce wrote: ↑Tue Nov 01, 2022 8:25 amHi,
You should able to get both the manual and parts catalog here on J109.org
https://j109.org/docs/Yanmar_3GM30F3.pdf
https://j109.org/docs/Yanmar-3GM30-parts-catalog.pdf
I have the hardcopies of the manuals but these are sweet! Thanks for posting the links. I am going to try to find the 2gmf parts book PDF. Coincidentally, after an abysmal performance in the latest Bay Area Vallejo 1/2 race I am dedicated to "deweighting" the boat. I have 100 pounds off so far and with these PDFs I can offload the hardcopy manuals for another three pound savings.
I am also having the bottom done after 4.5 years (yea, I know) and replacing my camber spar jib now that I finally know how the camberspar works thanks to this board.
I plan on destroying one of my chief rivals in the next race.... and yes, hope springs eternal...
Last edited by mike cunningham on Tue Nov 01, 2022 1:03 pm, edited 1 time in total.
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
- mike cunningham
- Posts: 489
- Joined: Sat Dec 20, 2008 11:21 am
- Location: Jacqueline, F30 #3, Discovery Bay, California
Re: 3GM30 Manual -
Well that was easy.
Here is parts catalog PDF for the 2GM20F
http://j30.us/files/Yanmar-2GM20-Parts-List.pdf
Here is parts catalog PDF for the 2GM20F
http://j30.us/files/Yanmar-2GM20-Parts-List.pdf
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment