Camber spar too long?

Grimsby_Alan
Posts: 77
Joined: Wed Oct 26, 2016 12:42 pm

Re: Camber spar too long?

Post by Grimsby_Alan »

I’ve noticed while rigging mine that it goes on much more easily if the curve of the spar is oriented upwards. Hope it helps.
1984 F32 Hoyt hull #41
Port Dalhousie, Ontario

jlodolce
Posts: 27
Joined: Sun Jan 06, 2013 12:30 pm
Location: Sackets Harbor, NY (Lake Ontario)

Re: Camber spar too long?

Post by jlodolce »

It took me a few years to figure this out on my 40/40 #16. I attach the camberspar to the aft/mast end of the the camberspar first, raise the jib, run a small heavy twine through the grommets to the bow rail, pulling the sail forward until I can get the bolts through the grommets and metal clip. The key is raising the sail most of the way.
Jim Lo Dolce
Lo Dolce Vita VII
Freedom 40/40 #16 1995
Sackets Harbor, NY (Lake Ontario)

Post Reply