Looking for a F32 spinnaker

Use this forum to buy, sell, trade or advertise anything. Non-commercial only.
Post Reply
User avatar
JohnReinagel
Posts: 91
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Looking for a F32 spinnaker

Post by JohnReinagel »

Does anyone have an F32 (Garry Hoyt) spinnaker that they wish to sell?

I've now used the gun mount set up with great success but the old spin that came with it has blown up this past weekend. I was hoing to get the rest of the season out of it as using it adds a considerable amount of fun-factor to the boat and it is quite simple to use. I have been leaving most of the set up in place and to use it ony takes about 10 minutes to prep it, so I found myself using it more than expected, singlehanded every time even.
John


1984 Hoyt F32
Hull #53

peaceandfreedom
Posts: 206
Joined: Wed Jul 29, 2009 8:51 pm
Location: F 33 CK Milford ct

Re: Looking for a F32 spinnaker

Post by peaceandfreedom »

Hello John,
I have a spinnaker available. Please contact me via PM to discuss.

Happy sailing.

Jim D.

User avatar
JohnReinagel
Posts: 91
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Post by JohnReinagel »

Jim, two attempts at sending you a PM, both sit in my outbox. I'm uncertain as to why.
John


1984 Hoyt F32
Hull #53

sforgey2
Posts: 21
Joined: Mon Sep 10, 2018 7:02 am
Location: San Jose & Ft Lauderdale
Contact:

Re: Looking for a F32 spinnaker

Post by sforgey2 »

It would be great to have the dimensions of the spinnaker if anyone has them.

I am thinking of having one made as mine is on its last leg as well. One good puff and it is going to shred, but it sure is fun to ride.


Thanks,
Scott Forgey
Girlfriend
Freedom 32 Hoyt #85

User avatar
GeoffSchultz
Posts: 1057
Joined: Thu Dec 04, 2008 8:39 am
Location: BlueJacket: Guatemala
Contact:

Re: Looking for a F32 spinnaker

Post by GeoffSchultz »

JohnReinagel wrote:Jim, two attempts at sending you a PM, both sit in my outbox. I'm uncertain as to why.
Note that PMs sit in your outbox until the recipient reads them.
BlueJacket
1997 Freedom 40/40
http://www.GeoffSchultz.org

User avatar
JohnReinagel
Posts: 91
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Post by JohnReinagel »

Ah thank you Geoff, obviously I wasn't aware of that, thanks for clarifying.
John


1984 Hoyt F32
Hull #53

User avatar
mike cunningham
Posts: 332
Joined: Sat Dec 20, 2008 11:21 am
Location: Jacqueline, F30 #3, Discovery Bay, California

Re: Looking for a F32 spinnaker

Post by mike cunningham »

Apparently the original F32 spinnakers are getting too long in the tooth. I blew mine out as well. I have a 32 rig on a my F30 and although it is fantastic set up, it is currently spinnaker-less. I am interested in a replacement also so if someone else happens to have one for sale please advise.
Mike Cunningham
Freedom 30 (Mull) Hull #3
Build date...June, 1986 . Freedom Yachts USA, sloop, shoal keel
Gun Mount and pole retrofitted (purchased from a Hoyt Freedom 32)
Yanmar 2gm20F , 1600 hrs fixed two blade prop
e-rud and ocean racing equipment

User avatar
JohnReinagel
Posts: 91
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: Looking for a F32 spinnaker

Post by JohnReinagel »

Hi Mike,

I ended up ordering a new spinnaker from from Precision Sails, it is due to be delivered in March. Since I'm in the NE I would get to try her until May or June depending on when I splash after some deck and window work. So far dealing with them has been good. I'll let you know how it all works out once it's received and flown.
John


1984 Hoyt F32
Hull #53

Post Reply