Hard rubber mast stand

Anything that doesn't fit into the other Physical Systems categories
User avatar
Posts: 204
Joined: Wed Sep 11, 2019 11:24 am
Location: UK

Re: Hard rubber mast stand

Post by newt2u »

Hi Kristoffer

here are the pictures. The mast has a stainless steel bracket with a half hole, which gets bolted down to the captive bolt embedded in the keel. The mast fits snugly over the top hat. The internal diameter of the CF mast is 125.8mm and this is the standard Tillotson Pearson mast. I hope this helps.

I guess it is possible the rubber boot was manufactured by whomever outfitted your boat to allow a standard aluminium mast profile to fit the F21 top hat. If all else fails, maybe a 3D printed boot could be made. What happened to the old one btw?
IMG_0151.jpeg (2.95 MiB) Viewed 48 times
IMG_0155.jpeg (3.45 MiB) Viewed 48 times
IMG_0156.jpeg (3.1 MiB) Viewed 48 times
Rockin - F21 twin drop keels - located Milford Haven, Wales

Post Reply