Posted by ron barr (rwhb@…>)
I think that Fuller Brush made the portholes on the Hoyt 32.
They look similar to my old Hatteras. I bought some from them years ago but I
can’t remember how. Does anyone have a clue how to contact them I can’t
find the portholes or screens on their on-line site. Thanks.
Ron
Hoyt F32 1984
Newport RI
Posted by Alan Kusinitz (akusinitz@…>)
Go to www.fuller.com
. Type: marine into their search box (near the bottom). All the ports and
accessories come up.
I think these are the best non metal ports
one can buy. The solid 5/8” thick plexiglass is as strong as very good
hatches (which have a much bigger surface area to support) and I’ve never
had a leak and these are the original ports on my 1982 F-33.
Alan
From:
FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of ron barr
Sent: Saturday, May 31, 2008 4:50
PM
To:
FreedomOwnersGroup@yahoogroups.com
Subject: [FreedomOwnersGroup]
14" x 7" Screens for portholes
I think that
Fuller Brush made the portholes on the Hoyt 32. They look similar to my old
Hatteras. I bought some from them years ago but I can’t remember how.
Does anyone have a clue how to contact them I can’t find the
portholes or screens on their on-line site. Thanks.
Ron
Hoyt F32 1984
Newport RI
\
Posted by ron barr (rwhb@…>)
Thanks Alan- yes but the only size it seems to come up with is
5” x 12” – I thought there were two sizes.
Ron
Hoyt F32
Newport RI
Posted by Bob Weeks (rweeks6508@…>)
There is at least two sizes that I saw……5
x 12, 7 x 15
Bob
From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of ron barr
Sent: Sunday, June 01, 2008 1:53
PM
To: FreedomOwnersGroup@yahoogroups.com
Subject: [FreedomOwnersGroup] Re:
14" x 7" Screens for portholes
Thanks Alan- yes
but the only size it seems to come up with is 5” x 12” – I
thought there were two sizes.
Ron
Hoyt F32
Newport RI
\
Posted by Alan Kusinitz (akusinitz@…>)
There are 2 sizes. Just 2 but I can’t
remember what they are. You could always call them.
Alan
From:
FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of ron barr
Sent: Sunday, June 01, 2008 1:53
PM
To:
FreedomOwnersGroup@yahoogroups.com
Subject: [FreedomOwnersGroup] Re:
14" x 7" Screens for portholes
Thanks Alan- yes
but the only size it seems to come up with is 5” x 12” – I
thought there were two sizes.
Ron
Hoyt F32
Newport RI
\
Posted by George Huffman (thatboatguy2@…>)
This is a little late and not sure if anyone posted this but it’s a link to the PDF with the Fuller Brush Portlight dimensions. Fuller Brush Portlight PDF I’ve completed all the work to replace the 6 large ones in our main saloon with Beckson ones except to actually install them. Of course all the photos of the process to date are on my old laptop which died last week. I’m hoping that I can at least salvage the hard drive to an external drive case to recover my data. George— In FreedomOwnersGroup@yahoogroups.com, “Alan Kusinitz” <akusinitz@…> wrote:>> There are 2 sizes. Just 2 but I can’t remember what they are. You could> always call them.> > Alan> > > > _____ > > From: FreedomOwnersGroup@yahoogroups.com> [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf Of ron barr> Sent: Sunday, June 01, 2008 1:53 PM> To: FreedomOwnersGroup@yahoogroups.com> Subject: [FreedomOwnersGroup] Re: 14" x 7" Screens for portholes> > > > Thanks Alan- yes but the only size it seems to come up with is 5" x 12" - I> thought there were two sizes. > > > > > > Ron > > Hoyt F32> > Newport RI>
Posted by ron barr (rwhb@…>)
Thanks everyone— I ran it down finally! Mine is black but
the white 7x15 should be the same.
The screen is somewhat smaller than the port obviously.
Ron
Hoyt F32
Newport RI