Posted by Dave_Benjamin (dave_benjamin@…>)
John,
Glad to hear you found Polecat a new home. You may remember me. Your
wife invited me and a friend of mine on board your beautiful 44 when
it was docked near Chevy’s in Alameda. We met you as we were leaving.
Hope all is going well.
— In freedomyachts2003@yahoogroups.com, johnpolecat3@… wrote:
She is just as pretty as polecat, and I offered to crew myself. j
-----Original Message-----
From: Michel Capel <mike_c_f35ck@…>
To: freedomyachts2003@yahoogroups.com
Sent: Fri, 10 Feb 2006 20:08:50 -0000
Subject: [freedomyachts2003] Re: Mast wiring- RadarHmmmmm…a young lady owning a Freedom 44… makes me verrrrry
curious…(about this young lady, not the F44) :^P— In freedomyachts2003@yahoogroups.com, johnpolecat3@ wrote:
The boat you saw was my ole boat which I sold to a young lady in
Sausilto Polecat a 44 freedom aloha john-----Original Message-----
From: svfantasy@
To: freedomyachts2003@yahoogroups.com
Sent: Thu, 09 Feb 2006 19:35:53 -0800
Subject: Re: [freedomyachts2003] Re: Mast wiring- RadarMichel & Tom,
Thanks for the information on radar mast wiring. I hope it goes
smoothly. No Tom, that wasn’t me sailing the “slot”. Must be another
Freedom. I presently live aboard in the Antioch Marina, but will be
on the bay in a couple of months. Maybe I’ll see you then.
Jay
S/V Fantasy F-40----- Original Message -----
From: tom
To: freedomyachts2003@yahoogroups.com
Subject: [freedomyachts2003] Re: Mast wiring- Radar
Date: Thu, 09 Feb 2006 17:28:17 -0000Hello Jay,
A couple years ago I replaced a Vigil radar system with a new
Furuno.
As you suggested, I simply pulled the new cable thru the mast using
the old Vigil. At the mast mount for the radome, I had to fashion
an
adaptor plate because the Furuno holes didn’t math the existing
mount
very well.By the way, was that you aboard Fantasy that I saw sailing
the “slot”
on Sunday the 29th? I saw what was clearly a cat ketch leaving
Richardson Bay from the Sausilito area, heading for the main bay.
Great day.Tom Marlow
Ketch 22— In freedomyachts2003@yahoogroups.com, “Jay Glen” <svfantasy@>
wrote:Hello all,
I’m in the process of installing a Raymarine C-70 Chartplotter
and
Radar on my 1981 Freedom 40 Cat-Ketch. I’m just wondering what
to
expect when I replace the existing Furuno Radome with the
Raymarine
radome. Is it a simple matter of attaching the new radome wire
to the
old, and then pull out the old causing the new wire to follow
the old
through the mast? Or, is it more complicated than that? Any
advice
would be greatly appreciated.Jay Glen
S/V Fantasy
San Francisco Bay AreaSPONSORED LINKS Sailing schools Sailing instruction Sailing lesson
Sailing course Sailing adventure SailingYAHOO! GROUPS LINKS
Visit your group “freedomyachts2003” on the web.
To unsubscribe from this group, send an email to:
freedomyachts2003-unsubscribe@yahoogroups.comYour use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.Yahoo! Groups Links