Posted by kholden@…> (kholden@…>)
Apparently my rather lengthy post last
night didn’t get thru. I am reluctantly selling my F-30 sloop, but need
to replace the gun-mount sleeve. Attempts to buy one have failed, but I was
hoping someone might be able to give me measurements and/or photos to help me
build one. My questions are the overall length of the sleeve itself. (I’ve
heard 12 inches but my recollection was that it was longer than that.) I also
am unsure of the length of the mounting bolt and the bolts diameter. I have two
options for materials, either heavy duty aluminum or stainless steel. Any
recommendations?
Also someone posted awhile back about the
plastic liner. I haven’t been able to find that post, and would
appreciate the material info again.
Lastly I want to thank everyone on this
board. You are amazingly well informed and of great help to all of us. I shall
miss you.
Kent
Holden
F-30 Breakaway
Connecticut
From:
freedomyachts2003@yahoogroups.com [mailto:freedomyachts2003@yahoogroups.com] On Behalf Of jody kaplan
Sent: Wednesday, May 24, 2006
11:51 AM
To:
freedomyachts2003@yahoogroups.com
Subject: [freedomyachts2003] dyer
dinghy for sale
Hi all , have a dyer 8 ft
midget dink rowing model ,
with oars . In very good shape with two part paint and
a rubber rubrail . 650 without engine, 900 with . Long
Island area , 718 594 5136 , jody
— freedomyachts2003@yahoogroups.com
<dave_benjamin@…> wrote:
I think you’ll find Al MacDiarmid’s story useful
http://www.homestead.com/broadreacher/
— In freedomyachts2003@yahoogroups.com,
“kestrel1857” <zenda@…>
wrote:
Hello all,
Reading Reuel Parker has peaked my interest in cat
rigs. Would you
consider the Freedom 28 a suitable design for
extended offshore
sailing? I’ve been looking for hours, but can’t
find a picture or
lines drawing of the hull below the waterline for
any of the
Freedoms.
Any feedback would be appreciated.
\
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
DISCLAIMER Do not transmit instructions regarding your account by e-mail; instructions transmitted by e-mail will not be accepted by us, and Gagnon Securities will not be responsible for carrying out such instructions. Gagnon Securities archives and reviews all outgoing and incoming e-mail. It may be produced at the request of regulators or in connection with civil litigations. Information contained herein has been obtained from sources believed to be reliable, but its accuracy and completeness, and that of the opinions based thereon, are not guaranteed. This e-mail is not an offer to buy or sell or a solicitation of an offer to buy or sell securities.
Posted by Michael Bergeron (mbergero@…>)
I still have a gun mount, pole and spinnaker for sale from my F32. Good condition, but I want the pole and mount to go as a set, unless interested parties want to get together and divide it up. I have pics and will again try to post them.
Mike
----- Original Message -----
From: kholden@…
To: freedomyachts2003@yahoogroups.com
Sent: Wednesday, May 24, 2006 12:36 PM
Subject: RE: [freedomyachts2003] Spinnaker Questions
Apparently my rather lengthy post last night didn’t get thru. I am reluctantly selling my F-30 sloop, but need to replace the gun-mount sleeve. Attempts to buy one have failed, but I was hoping someone might be able to give me measurements and/or photos to help me build one. My questions are the overall length of the sleeve itself. (I’ve heard 12 inches but my recollection was that it was longer than that.) I also am unsure of the length of the mounting bolt and the bolts diameter. I have two options for materials, either heavy duty aluminum or stainless steel. Any recommendations?
Also someone posted awhile back about the plastic liner. I haven’t been able to find that post, and would appreciate the material info again.
Lastly I want to thank everyone on this board. You are amazingly well informed and of great help to all of us. I shall miss you.
Kent Holden
F-30 Breakaway
Connecticut
From: freedomyachts2003@yahoogroups.com [mailto:freedomyachts2003@yahoogroups.com] On Behalf Of jody kaplanSent: Wednesday, May 24, 2006 11:51 AMTo: freedomyachts2003@yahoogroups.comSubject: [freedomyachts2003] dyer dinghy for sale
Hi all , have a dyer 8 ft midget dink rowing model ,with oars . In very good shape with two part paint anda rubber rubrail . 650 without engine, 900 with . LongIsland area , 718 594 5136 , jody— freedomyachts2003@yahoogroups.com<dave_benjamin@…> wrote:> I think you’ll find Al MacDiarmid’s story useful> > http://www.homestead.com/broadreacher/> > > — In freedomyachts2003@yahoogroups.com,“kestrel1857” <zenda@…> > wrote:> >> > Hello all,> > Reading Reuel Parker has peaked my interest in catrigs. Would you> > consider the Freedom 28 a suitable design forextended offshore> > sailing? I’ve been looking for hours, but can’tfind a picture or> > lines drawing of the hull below the waterline forany of the > Freedoms.> > Any feedback would be appreciated.> >> > > > > __________________________________________________Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
DISCLAIMER Do not transmit instructions regarding your account by e-mail; instructions transmitted by e-mail will not be accepted by us, and Gagnon Securities will not be responsible for carrying out such instructions. Gagnon Securities archives and reviews all outgoing and incoming e-mail. It may be produced at the request of regulators or in connection with civil litigations. Information contained herein has been obtained from sources believed to be reliable, but its accuracy and completeness, and that of the opinions based thereon, are not guaranteed. This e-mail is not an offer to buy or sell or a solicitation of an offer to buy or sell securities.